High-Pressure Screw Air Compressor for Laser Cutting (16 bar)
Screw Air CompressorCompression
Single-stage screw, air cooled.
Drive
Belt drive with taper-lock pulleys, so the drive ratio is not fixed.
Motor
DBV-20A6-H16 uses Y2-132M2-2 at 2910 rpm; DBV-30A-H16 uses Y2-160L-2 at 2950 rpm.
Oil charge
20 L on both models.
Pressure rating
DBV-20A6-H16 is rated 1.6 MPa. DBV-30A-H16 is published at 0.8 MPa - confirm the rating on your quotation before ordering.
Product Advantages:
- DBV-20A6-H16 delivers 0.69 to 1.38 m³/min at 1.6 MPa, which is the pressure band laser cutting and some bottle blowing work sits in.
- Variable speed, belt driven, 15 kW: the drive ratio can be changed if your duty point moves.
- 20 L oil charge on both models, so service intervals are predictable.
- Second row is DBV-30A-H16 at 22 kW. Its published rating is 0.8 MPa, not 1.6 MPa, despite the model code — see the note under the table.
- Ask for the pressure–flow curve at your cut thickness before you commit to a model.
No catalogues available.
Free Consultation:
If you are interested in our products, please contact us via email: info@example.com or send your inquiry in the form below, we will reply you within 24 hours.
High-pressure model range — 15 to 22 kW
DBV-20A6-H16 is the 16 bar model: 0.69 to 1.38 m³/min at 1.6 MPa. The 22 kW unit is listed underneath with its own pressure rating, which is 0.8 MPa.
| Model | m³/min | Pressure MPa | Motor | Motor model | Speed rpm | Oil charge | Drive |
|---|---|---|---|---|---|---|---|
| DBV-20A6-H16 | 0.69 – 1.38 | 1.6 | 15 kW | Y2-132M2-2 | 2910 | 20 L | Belt drive |
| DBV-30A-H16 | 1.1 – 2.2 | 0.8 | 22 kW | Y2-160L-2 | 2950 | 20 L | Belt drive |
Read the pressure column before you order. DBV-30A-H16 carries the H16 code but the published rating is 0.8 MPa, so treat it as an 8 bar machine until we confirm otherwise in writing on your quotation. 1.6 MPa = 16 bar.
